Skip to content
Green Queen
AccountYour bag

From the Green Queen kitchen

Why Do I Have Less Cannabis Oil After Straining?

A little oil left behind can leave you with a lot of questions. Here’s how to measure what you collected, check your recipe and keep volume separate from strength.

By Green Queen

Infusion-preparation illustration with a cloth-lined strainer, measuring jug of golden oil and a spoon of buttery blend

You finish your infusion, pour it through the cloth and look at the measuring cup. There’s less oil than you started with. The saucepan isn’t hiding a second batch. So where did it go?

Some oil can remain with the strained herb or on the equipment used to prepare it. Your next step is to measure what you collected, check what your recipe needs and keep those quantities separate from any estimate of cannabis strength.

If you’re using Original Potency Booster, follow the preparation and straining directions on your package first. The same measuring questions come up with other cannabis-infused cooking oils and cannabutter, although their preparation methods can differ.

A little less oil doesn’t tell the whole story.

Measure the finished infusion before adding it to a recipe. A difference in oil volume is not a measurement of THC loss, and adding plain oil does not replace cannabinoids.

For the Green Queen brownie kit, use its own kit directions. Don’t apply a general top-up example to the kit automatically.

Where did the missing oil go?

Some can stay with the herb.

After infusion, the strained plant material can still hold oil. A study of pharmaceutical cannabis-oil preparation measured oil retained with plant material after filtration. The researchers used standardized olive- and MCT-oil methods and a mechanical press, so their results are not a recovery target for your kitchen or for Potency Booster.

Some can stay on the equipment.

Look at the saucepan, spoon, filter cloth and receiving bowl. An oily coating or a spill during transfer is part of the practical picture too. If you measure only what reaches the storage jar, oil left in the bowl is not included in that reading.

Some apparent loss can be a measuring mismatch.

Compare like with like. A starting amount read from one container and a finished amount guessed from the height in a different jar are not a reliable pair of measurements. Use actual graduations or the weight units your recipe specifies. Compare the ingredient in the same usable state rather than treating a scoop of solid fat and a liquid reading as interchangeable.

How much oil loss is normal?

There is no single percentage this guide can promise for every home infusion. The amount of herb, the preparation and filtering method, the equipment and the transfers are all things to record when comparing batches.

Rather than starting with an internet percentage, record your own starting and recovered amounts. A repeatable setup makes those notes more useful. It still does not turn a home measurement into a lab result.

A measuring example—not a tested yield

60 mL in. 45 mL collected.

In this hypothetical example, the difference is 15 mL, or 25% of the starting volume. That describes the amount collected. It does not prove that 25% of the THC was lost, that the rest became stronger, or that your next infusion should recover the same amount.

Measure what made it to the bowl.

1. Have a suitable receiving container ready.

Use clean, food-safe equipment that suits the method and temperature of your infusion. Support the strainer securely so it cannot tip into the bowl as you pour. Give yourself enough room to work without balancing a hot pan over a narrow jar.

2. Follow the method’s straining instructions.

Use the cloth or filter the method calls for and let the infusion collect in the receiving container. Follow any directions about draining or pressing. Do not wring hot cloth with bare hands or turn up the heat to force a quicker result.

3. Read the recovered amount.

For liquid oil, use a suitable graduated liquid measure on a level counter and read the marking at eye level. For small quantities, choose a measure with markings you can actually read at that amount. King Arthur Baking’s measuring guide explains why the container and viewing angle matter.

If your recipe uses grams, weigh the finished ingredient in a tared container instead. Keep the units consistent in your notes. One milliliter of oil is not automatically one gram, and an ounce of weight is different from a fluid ounce.

4. Measure the amount going into the recipe.

The jar may contain enough infusion for several recipes. Measure the amount used in this batch separately from the total amount recovered. A recipe using part of the jar does not receive the estimated cannabinoid content of the whole jar.

My recipe needs more oil than I collected.

For a general recipe, check the required total fat.

If you are using a separate brownie, cookie or other recipe, start with the fat it specifies. An oil-based formula may allow you to use a measured portion of a compatible infused oil and make up the required total with the appropriate plain oil. A butter-based formula needs its own suitable ingredients; oil and butter are not automatic substitutes for one another.

Volume example only

The recipe calls for ½ cup of suitable oil.

You have chosen to use ¼ cup of compatible infused oil. Adding ¼ cup of suitable plain oil brings the total to ½ cup. That is a way to preserve the recipe’s oil volume—not a suggested cannabis dose or a guarantee that those ingredients suit every recipe.

Before mixing, account for the actual infused amount in your batch estimate. Adding plain oil changes the concentration of the combined oil; it does not add THC. If you use only part of the combined mixture, account for that portion too.

For the Green Queen kit, keep the kit directions together.

The brownie kit calls for its supplied Potency Booster, which you infuse and strain before mixing with the other kit ingredients. It does not call for an entire standalone 8-ounce jar, and this guide does not establish an extra-oil allowance or a specific recovered-volume target for the kit.

Use the Green Queen brownie kit directions as written. If you spilled a significant amount or are unsure whether enough remains, ask us about your package and what happened before changing the batter.

Oil volume and cannabis strength are different measurements.

The amount in a measuring cup tells you how much infusion you collected. It does not tell you how much THC moved into that infusion, how much remained with the strained material or the exact strength of the finished oil.

Do not automatically divide all the theoretical THC in the starting flower by a smaller recovered volume and call the answer measured potency. That assumes cannabinoid recovery you have not established. Likewise, losing some oil does not prove the remaining oil is stronger or weaker.

When working with a concentration estimate, keep its assumptions visible. The basic recipe calculation is estimated concentration × the amount of infusion actually used, followed by division across the intended portions. Use compatible units throughout.

Our edible dosage calculator can help organize an estimate, but a home calculation does not measure your finished infusion. Laboratory analysis is needed to establish cannabinoid concentration. Keep that uncertainty with the batch notes instead of letting a precise-looking number hide it.

Edible dosage calculator

How much THC is in your homemade edibles?

Use our edible dosage calculator to estimate THC per serving—from your first batch of brownies to your favorite infused recipes.

Estimate THC per serving ↗
Retro cream and gold calculator with a THC display and golden star sparkles

Should I squeeze the strainer cloth?

Follow the instructions for the method and filter you are using. Pressing changes the oil-recovery process; the pharmaceutical study mentioned above used a mechanical press, not a household cloth squeezed by hand. Its result does not establish a universal pressing technique for home infusions.

Set up a stable strainer, avoid contact with hot oil and use tools suited to the method. Do not assume extra force guarantees a particular recovery percentage or a particular THC amount.

Keep a little kitchen record.

You do not need a complicated spreadsheet. These notes are enough to make the next batch easier to compare:

  • The infusion product or recipe and its directions.
  • The cannabis amount and labeled potency, if known.
  • The starting oil amount, with units.
  • The straining equipment and method.
  • The measured amount collected, before any plain oil is added.
  • Any added plain ingredient, the amount of infusion used in the recipe and the final portion count.

Label the finished infusion clearly, including the preparation date and whether its strength is estimated or tested. Follow the product or method’s storage instructions and keep cannabis products secured away from children and pets. The CDC recommends locked, child-resistant storage and notes that edible effects can be delayed and unpredictable.

A few questions before you strain.

Did straining remove all the THC?

You cannot tell from the recovered oil volume. Straining separates the plant material from the infusion, but it is not a cannabinoid measurement. Do not use the amount left in the cup to declare the batch weak or strong.

Should I start with extra oil next time?

Check the complete infusion method first. Increasing the starting oil changes the preparation and any strength estimate. If your goal is enough finished infusion for a particular recipe, plan with measured recovery notes and the method’s directions rather than adding an arbitrary percentage.

Can I rinse oil out of the cloth with water?

Do not add rinse water to the infusion or batter as an improvised fix. Water changes what you have collected and the recipe’s liquid balance. Use the straining and transfer steps specified by your method.

Can I use a coffee filter instead?

Use a clean, food-safe filter suited to your method and equipment. This guide does not establish coffee filters as interchangeable with the cloth supplied in a Green Queen kit. Changing the filter also changes one of the variables in your recovery notes.

Is the strained herb good for another batch?

The remaining cannabinoid content is unknown without testing, so do not assign it a predictable dose or reuse it as though it were fresh flower. The Green Queen brownie kit directions tell you to discard the strained herb.

Less guessing. More measuring.

Use the package method, collect the infusion carefully and measure what you actually have. Then match the amount used to your chosen recipe. For a wider look at choosing a brownie method, read our general weed brownies guide; for your Green Queen kit, keep its specific directions beside the mixing bowl.